Undoubtedly, power cords are inevitable when it comes to industrial settings. Why not when they are essential for smooth operations or minimising downtime? However, at times, if neglected, power cords can cause serious damage and safety hazards as well. It’s something quite common for power cords; the catastrophe takes place due to accidental disconnections.
Wondering which cords are best for protection against such issues? This is where the Nema power cord comes in. Wondering what its safety features are? Before knowing that, let's understand the different types of accidental disconnection that occur in industrial settings.
Different Types of Accidental Disconnections in Industrial Setups
Accidental disconnections in industrial uses lead to several issues. However, having a deep understanding of the different types can save you from further issues. So the various accidental disconnections that occur in industrial settings are:
- Mechanical disconnection occurs when a power cord is physically damaged or pulled out.
- Environmental disconnection occurs due to extreme temperatures, exposure to chemicals, or high moisture.
- Electrical disconnection occurs due to electrical faults or surges.
- Human error disconnection: it occurs when personnel unintentionally disconnect the power cord during repair or maintenance.
- Wear and tear disconnection—it occurs due to deterioration over time or damaged insulation.
- Cable management disconnection occurs due to poorly organised cables or inadequate cable ties.
Why is NEMA Power Cord the Best Choice to Prevent Accidental Disconnections?
Wondering what makes NEMA power cords the best choice to prevent accidental disconnections in industrial settings? Well, these cords have safety safeguards that help protect electrical equipment from power surges and electrical fires.
For instance, assume there is a 6-milliampere difference between the outgoing power and the current returning to the device via the neutral wire. In a situation like that, the circuit will be immediately disconnected by a device. This device can be something like a ground-fault circuit interrupter. There are plenty of safety features present for the NEMA power cords. Check them out below.
Some of the safety features of the NEMA power cords are:
- A toddler cannot jam any object into the NEMA plug as they have a tamper-resistant receptacle at the front, thanks to its spring-loaded top.
- They have robust connectors that lower the risk of accidental disconnections.
- They keep the cords securely connected, thanks to their positive locking mechanisms.
- To reduce disconnection risks, these cords have strain relief features such as flexible boots that also prevent cord damage.
- When you talk about the NEMA power cords, they are weather-resistant. They can withstand outdoor calamities as well as hot and humid climates.
- These cords come with heavy-duty insulation, preventing wear and tear. So there will absolutely be no chance of any disconnection issues.
Tabular Representation of the Safety Features of NEMA Power Cord
Here is a tabular representation of the safety features of the Nema power cord:
Nema Power Cord | Safety Features |
Design features | Secure connectors, positive locking mechanisms, strain relief and heavy-duty insulation |
Industrial-grade materials | High-temperature resistance, chemical resistance and abrasion resistance |
Safety certification and compliance | Underwriters Laboratories, Canadian Standards Association, Occupational Safety and Health Administration, and National Electric Code |
Different Applications of NEMA Power Cords in Industrial Settings
Talking about industrial applications, the NEMA power cords are for different purposes. This includes:
- In manufacturing, such as machinery and equipment.
- In oil and gas, such as pumps and drilling equipment.
- In healthcare, such as lighting and power systems.
- In construction, such as generators and power tools.
Each NEMA plug has its own unique voltage and amperage ratings, depending on which it can be used for different applications. However, when it comes to selecting NEMA power cords for industrial settings, make sure to know your requirements, environmental conditions, and more.
Other Ways to Prevent Accidental Disconnection
There is no denying that reliable power is crucial in industrial settings. In addition to using different NEMA power plug types for different industrial needs, here are some more safety precaution tips to avoid accidental disconnection during operation:
- Avoid using equipment in industrial settings with damaged cords or broken plugs.
- Avoid repairing any electrical equipment or cord with wet hands.
- Always be observant about signs and safety rules.
- Regularly inspect the NEMA power cord and check for signs of damage.
- Make sure you are using the right voltage and ampere of NEMA cords matching with those of your equipment.
- Always use locking connectors for industrial applications, as they ensure a better and more secure fit.
- Use GFCI protection at your industrial worksite.
Following these simple tips not only ensures a safe operation but also prevents accidental disconnection while maintaining your and your team's safety.
Enjoy Reliable Connections for Your Industrial Needs
At SF Cable, we have been fulfilling the needs of different customers for all their industrial needs. In addition to offering high-quality material NEMA power cords, we also keep ourselves updated to meet the changing demands. Our power cords are meant to last and come with top-notch safety features. With us, you not only get to explore different Nema power plug types, but you can also choose from different colors. Moreover, you can also seek personalised guidance from our highly skilled team of professionals.
